|  How
to burn AVI to DVD(playing on regular DVD Player)?
The guide below shows a way to convert your DivX,
XviD format AVI
files to DVDs. I admit that these programs are not the
best way to do the job, just I believe it's the easiest
one. So if you find the TMPGEnc Plus / DVD Authoring
program way too compicated, this
guide will let you burn your AVI files to DVD with just
a few clicks
Step
by Step Guide for burn AVI to DVD - Click Here
It enables you to convert and
burn any video file directly to VCD, DVD, SVCD, MPEG1
and MPEG2 format.
Support DivX, XviD
format avi files, Support VOB,
ASF, WMV
format as input file, too.
Features:
- Convert
AVI to SVCD/DVD/VCD compatible mpeg file
- Support VOB, ASF, WMV format as input file
- Support DivX, XviD avi format
- Support MPEG1, MPEG2, MPEG4 video format
- Support MPEG layer1, layer2, layer3 audio format
- Color correction function.
- Support Subtitle, you can add subtitle onto your output
movie. (You need to install VobSub software first.)
- "Split function" to cut a big mpeg file
into several smaller parts to fit a CD-R capacity
- Support both TV systems: NTSC/PAL
- Input/Output preview
- Two output modes: Stretch to Fit / Lock Aspect Ratio
- High audio quality
- Can output *.m2v and *.mpa for DVD authoring
- Support no sound avi files
- Optimized for Intel Pentium 3 and Pentium 4 processors
and AMD Athlon
- Batch Function, Support converting multiple avi files
to DVD VCD - - - SVCD MPEG1/2 at the same instance
- Merge/Join function, Support selecting several avi
clips from different sources and combine them into one
single output
- Online upgrade/help service site (click here to enter)
- In full version, added an Update Detector, you can
easily know if a new version is available.
Input
AVI specification:
'AVI to VCD / DVD' will encode avi files that fit the following limitations:
Input Video: 'AVI to VCD / DVD' supports any frame rate from 5 to 60 frames per second. If a media file is used that has a lower or higher frame rate than the above, the 'AVI to VCD / DVD' will play back faster or slower than normal.
Input Audio: 'AVI to VCD / DVD' can supports almost all audio format, include 8, 11.025, 12, 16, 22.05, 24, 32, 44.1 and 48 kHz, 16-bit stereo/mono audio. Other audio types include MPEG Layer 1, 2 and 3 are all supported. 'AVI to VCD / DVD' also converts all audio to stereo, if it is not already stereo.
The video codec used should be compatible with DirectShow, in another words, your avi/mpeg file can be played in Microsoft Media Player 8.0 or over.
Note that for best quality, there are preferred values which will not require 'AVI to VCD / DVD' to resize or resample the input to match VCD specifications. The ideal values are (depending on target format)
| VCD specification | DVD specification | SVCD specification | NTSC:
Horizontal width: 352
Vertical height: 240
Frames per second: 29.97
Color depth: 24 or 32 bits
PAL:
Horizontal width: 352
Vertical height: 288
Frames per second: 25
Color depth: 24 or 32 bits | NTSC:
Horizontal width: 720
Vertical height: 480
Frames per second: 29.97
Color depth: 24 or 32 bits
PAL:
Horizontal width: 720
Vertical height: 576
Frames per second: 25
Color depth: 24 or 32 bits | NTSC:
Horizontal width: 480
Vertical height: 480
Frames per second: 29.97
Color depth: 24 or 32 bits
PAL:
Horizontal width: 480
Vertical height: 576
Frames per second: 25
Color depth: 24 or 32 bits |
Note:
If you don't know what the parameters of the video file
you have are, in explorer, right click on the file once,
then select 'Properties', then select the tab 'Details'
or 'Summary', depending on the version of Windows.
Output
MPEG specification
Resolution:
If this resolution is not the same as the input files,
they will be resized or cropped according to the specification
of VCD/DVD . Common resolutions include 352x240
for NTSC VCD, 352x288 for PAL VCD, 480x480 for NTSC
SVCD, 480x576 for PAL SVCD, 720(704)x480 for NTSC DVD
and 720(704)x576 for PAL DVD. (refer to above table)
Audio:
Output audio format is 32, 44.1 and 48 kHz, 16-bit stereo audio, which compatible with the specification of 'VCD / DVD / SVCD'. If none of the media input files contain audio this will be set to none and no audio is encoded.
| System required:
Software requirements:
AVI to VCD / DVD 3.X based on Microsoft DirectX technology. Works under all Windows? 9x, Me family Operating Systems as well as under WindowsNT?4.0 and Windows?2000, Windows?XP. ( for Windows ? NT 4.0 and Windows ? 95 it is necessary to install DirectX 8.1 or later).Hardware requirements:
MMX-enhanced CPU (Intel Pentium MMX, Pentium II, Celeron, Pentium III, AMD K6-2, K-6, Athlon, etc.)
32 MB RAM Any VGA card | Order information:
AVI to
VCD/DVD Converter is a shareware. A user who
want to use full-function requires registration. The registration
fee only costs $29.95 US dollars.
Once you register, we will send you registration code immediately and all newer versions will also registered to you.
|
| Related
Keywords |
| divx
to dvd, xvid
to dvd, 3gp converter,
convert dvd to vcd, convert
avi to dvd, convert
dvd to avi, convert
dvd to mpeg, convert
rm to mp3, convert
rmvb to dvd, swf
to avi dvd, dvd to
mp3, wmv to ipod, wmv
to psp, convert
dvd to divx, convert
vob to avi, dvd label
maker, dvd copier, avi
to ipod, avi to psp,
avi to dvd , jpg
to dvd, avi joiner,
avi splitter, mpeg splitter,
mpeg joiner, dvd
software , burn avi
to dvd, burn mpeg to
dvd, burn mpg to dvd,
avi to divx, mpg
to divx, dvd to zune |
|
